Sheet and drawing — Make CONTACT
The top edge of “Make CONTACT” in a row stays level. For “Make CONTACT”, hole spacing is fixed on the drawing. Around the letters of “Make CONTACT” we leave 12 mm so yellow enamel does not flood the stroke.
The format of “Make CONTACT” starts at 45 by 25 cm. For “Make CONTACT”, that is the lettering field, not only the margin. On a wall “Make CONTACT” is fixed with a post clamp, and the 1,2 mm sheet does not spring.
The period look of “Make CONTACT” comes from a green border, not fake wear. For “Make CONTACT”, the enamel stays even. In the rain “Make CONTACT” stays smooth, because the 10 mm rim sheds water off the face.
Shipping “Make CONTACT” uses corner guards. For “Make CONTACT”, a knock would chip yellow enamel even though it is hard. A quote for “Make CONTACT” needs 30 by 20 cm, the circle shape and the wording.
A quote for “Make CONTACT” needs size, the rounded rectangle shape and the wording. For “Make CONTACT”, the drawing skips needless data. The white shade on “Make CONTACT” is judged in daylight, 10 mm from the workshop lamp.
The edge of “Make CONTACT” after 860 degrees is checked against the light. For “Make CONTACT”, a blister goes back for repair. If “Make CONTACT” hangs in a row, the top edge stays level and the holes sit 11 mm apart.
The mark on “Make CONTACT” keeps its proportion. For “Make CONTACT”, cobalt enamel covers the ground and the letter stays clean. A later “Make CONTACT” keeps the same lettering, the red enamel and the 7 mm rim.
We cut “Make CONTACT” from 0,8 mm sheet into a rectangle and coat it with white enamel. We ship “Make CONTACT” upright, on 1,4 mm sheet, with the corner toward the middle of the crate.
Enamel and kiln — Make CONTACT
The 6 mm rim on “Make CONTACT” closes the edge before the kiln reaches 800 degrees. Around the letters of “Make CONTACT” we leave 8 mm so yellow enamel does not flood the stroke.
Holes for “Make CONTACT”, 4 of them, are drilled before enamel. For “Make CONTACT”, they sit 12 mm from the rim. On a wall “Make CONTACT” is fixed with standoffs, and the 0,8 mm sheet does not spring.
Letters on “Make CONTACT” are drawn thicker than the print. For “Make CONTACT”, green enamel rounds them slightly in the kiln. In the rain “Make CONTACT” stays smooth, because the 11 mm rim sheds water off the face.
A 1:1 proof of “Make CONTACT” is printed first. For “Make CONTACT”, the wording can shrink before the drawing meets the sheet. A quote for “Make CONTACT” needs 30 by 30 cm, the shield shape and the wording.
Gloss satin stays on outdoor “Make CONTACT”. For “Make CONTACT”, a corridor plate can stay quieter. The white shade on “Make CONTACT” is judged in daylight, 12 mm from the workshop lamp.
Mounting “Make CONTACT” is planned on screws with washers. For “Make CONTACT”, the holes match the drawing. If “Make CONTACT” hangs in a row, the top edge stays level and the holes sit 13 mm apart.
A run of “Make CONTACT” shares one drawing. For “Make CONTACT”, shade cobalt does not drift inside batch 433. A later “Make CONTACT” keeps the same lettering, the red enamel and the 8 mm rim.
We pack “Make CONTACT” with a slip sheet. For “Make CONTACT”, corners guard the white enamel in transit. We ship “Make CONTACT” upright, on 1,0 mm sheet, with the corner toward the middle of the crate.
Mounting and delivery — Make CONTACT
Cleaning “Make CONTACT” means water and a soft cloth. For “Make CONTACT”, scouring powder would scratch black enamel. Around the letters of “Make CONTACT” we leave 10 mm so yellow enamel does not flood the stroke.
A second language on “Make CONTACT” uses a smaller size, same face. For “Make CONTACT”, the drawing holds both lines. On a wall “Make CONTACT” is fixed with a facade rail, and the 1,4 mm sheet does not spring.
Lead time for “Make CONTACT” with 3 colours is about 12 working days after the drawing is approved. In the rain “Make CONTACT” stays smooth, because the 12 mm rim sheds water off the face.
Artwork for “Make CONTACT” can be PDF, SVG or JPEG. For “Make CONTACT”, we do not stretch the mark on the drawing. A quote for “Make CONTACT” needs 30 by 10 cm, the rounded rectangle shape and the wording.
At night “Make CONTACT” in navy stays readable, because letter and ground contrast is high. The white shade on “Make CONTACT” is judged in daylight, 8 mm from the workshop lamp.
The margin on “Make CONTACT” is 12 mm. For “Make CONTACT”, a long line breaks in two rather than thinning the face. If “Make CONTACT” hangs in a row, the top edge stays level and the holes sit 9 mm apart.
A repeat of “Make CONTACT” a year later uses the drawing. For “Make CONTACT”, face and cobalt enamel stay the same. A later “Make CONTACT” keeps the same lettering, the red enamel and the 9 mm rim.
Interior and facade versions of “Make CONTACT” differ in gloss high. For “Make CONTACT”, sheet thickness stays 1,0 mm. We ship “Make CONTACT” upright, on 1,6 mm sheet, with the corner toward the middle of the crate.
More from the workshop (Make CONTACT): Nasza oferta, Emaliowane szyldy browarów, Emaliowane szyldy dla schronisk.